&

Chemicals used in the soldering process can produce fumes and smoke that can be harmful to the operator.

Hexacon Electric recommends the use of fume extraction equipment
designed to capture and remove harmful fumes and smoke
before they are allowed to enter into a worker's breathing zone.

Nederman's mission statement Improving your workspace is amply reflected in their wide range of air pollution control products that fulfill the needs of virtually all industrial manufacturers. The modularity of Nederman products allow for easy installation in a single workplace environment as well as larger, more complex systems.

Soldering applications are best served through Nederman's Capture at Source and Bench Top products.

Capture at Source products extract polluted air at its source, before it can be inhaled. Typical products include fume-extractors, fans and a variety of fixed or portable filters.

Bench Top units include equipment for extraction of fumes or gases where the operator is sitting down such as when working on circuit boards and the concentration is on the work rather than the fumes.

 

Extraction Kits

 
 

Nederman Benchtop Extraction Kits are perfect for your smoke and fume extraction needs. These filtration units will filter harmful particles from the air and recycle clean air back into your facility. All Extraction Kits are complete filtration / extraction systems ready for use in your laboratory or workshop.

(EK 500, EK 1000 , EK 1500, EK 2000, EK 2500,
EK 3000 , CX 6000)

 

 

Extraction Arms

 

Nederman Mini Extractor Arms capture harmful fumes where they originate - at the source. Nederman Mini Arms can be used in as a single extraction point or connected to a central ventilation system to handle various applications. 
Arm extraction can be more effective because the arms do not obstruct the field of view.

(Mini Extractor Arm , Miniarm FX , Miniarm FX 32, FX 32 Down Draft Grill, CX 5500, MX 4100 ,
TX 3000)

 

 

Tip Extraction Units

 

With Nederman Tip Extraction Units, dangerous soldering fumes are captured right from the tip of the soldering iron.  Any number of soldering irons can be combined in a single filtration system.

For tip extraction using Hexacon Soldering Irons, we recommend the use of the Hexacon Iron Apapter Kit #FEK-23A

(TX 2000, TX 3100, TX 3000 ,  CX 6000, MX 4050, FilterMax)

Back to Hexacon | Contact Nederman | Visit the Nederman Website